ES-W200S Vane wind speed sensor

ES-W200S vane wind speed sensor is a wind speed measuring instrument independently developed and produced by our company. The sensor shell is made of aluminum material, with very small dimensional tolerance, and has high weather resistance, high strength, corrosion resistance and water resistance. Internal integration of photoelectric conversion mechanism, industrial microcomputer processor, standard current generator, current driver, etc.

ES-W200S vane wind speed sensor is a wind speed measuring instrument independently developed and produced by our company. The sensor shell is made of aluminum material, with very small dimensional tolerance, and has high weather resistance, high strength, corrosion resistance and water resistance. Internal integration of photoelectric conversion mechanism, industrial microcomputer processor, standard current generator, current driver, etc.

The circuit is designed according to EMI specifications, making the whole with extremely reliable anti-electromagnetic interference ability, and the electronic components are imported industrial-grade chips to ensure the stability of the measurement parameters and electrical performance.

Measurement range

0-30m / S; 0-50m / S; 0-60m / S; (other ranges can also be customized)

Starting wind speed

≤ 0.3m/s

Accuracy

± (0.3 + 0.03V) m / s, V is wind speed

Output signal

A: Analog output signal (0-2v, 0-5V, 0-10V), 4-20mA (current loop)
B: SDI-12 (American Hydrological Organization Serial Data Communication Interface Protocol)
C: RS485 (standard Modbus RTU protocol, device default address: 01)
D: Pulse signal (pulse amplitude 3.3V, 5V choose one)

Power supply voltage

Default: 5~24V DC (When the output signal is 0~2V, RS485, Pulse signal, SDI-12)
12~24V DC (When the output signal is 0~5V, 0~10V, 4~20mA)

Power consumption

24V/8mA(Heater off), 24V/0.8A(Heater on)

Stable time

< 1s

Response time

< 1s

Working environment

-30 ℃ ~ 70 ℃ (Not heated type),  -40 ℃ ~ 70 ℃(Heated type)

Cable specification

2m 3-wire system (analog signal); 2m 4-wire system (RS485) (optional cable length)

Material

Aluminum alloy

Heating mothod

PTC automatic heating (only for heating model)

Automatic heating

Bellow -1 ℃ , reach 25 ℃  automatically stop heating, heating power 12-24vdc

Protection level

IP66

Remarks: The heating function is automatically controlled according to the ambient temperature, or different start and stop temperatures can be set according to the use environment (the PWM control is used in the early stage of heating to prevent the impact of the current, the time is 120 seconds)

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.

احصل على اتصال!