ES-G334 Жидкокристаллический ЖК-датчик газа

ES-G334 Liquid crystal LCD gas sensor used to detect the gas concentration parameters in the air environment. When the concentration exceeds the preset alarm value, it will send out sound and light alarm signals to remind users to timely Take safety measures to prevent explosions and poisoning accidents, so as to ensure the safety of life and property.

ES-G334 Liquid crystal LCD gas sensor used to detect the gas concentration parameters in the air environment. When the concentration exceeds the preset alarm value, it will send out sound and light alarm signals to remind users to timely Take safety measures to prevent explosions and poisoning accidents, so as to ensure the safety of life and property.

ES-G334 gas transmitter adopts the big brand electrochemical sensor, which has the characteristics of fast and sensitive response and strong anti-interference ability. After our company’s unique compensation algorithm and multi-stage standard gas calibration, it also has long life, high precision, high repeatability and Features of high stability, with large LCD display.

ES-G334 gas transmitter adopts wide voltage 10-30V DC power supply, 485 signal output, standard Modbus-RTU communication protocol, ModBus address can be set, baud rate can be changed, the communication distance is up to 2000 meters.

Источник питания

10~30 В постоянного тока

Среднее потребление энергии

0.6W(24VDC)

Выходной сигнал

485 output (standard Modbus protocol)

Повторяемость

NH3/H2/CO(1000ppm)/H2S/CH4/NO2/SO2/CH2O/O3/PH3:≤2%
CO(2000ppm):≤3% O2:≤1%

Стабильность

CO(1000ppm)/H2S/H2/NO2/SO2/NH3/PH3

≤2% значение сигнала/месяц

СН4/СН2О/О3

≤7% значение сигнала/год

CO(2000ppm)/O2

≤5% значение сигнала/год

Рабочая температура

H2/CO/H2S/CH4/NO2/SO2/O2/NH3/PH3/O3: -20~50℃

Рабочая влажность

NH3/H2/CO/H2S/NO2/SO2/O3/PH3: 15~90%RH without condensation

O2: 5~95%RH без конденсации

CH4: 0~95%RH без конденсации

Рабочее давление

NH3/H2/CO(1000ppm)/H2S/SO2/O2/PH3

90~110 кПа

НЕТ2

91~111 кПа

СН4

80~116 кПа

CO(2000ppm)

80~120 кПа

Время предварительного нагрева

NH3/H2/CO/H2S/CH4/NO2/SO2/O3/O2/PH3: ≥5 minutes

Документы

Сделайте следующий шаг

Получить предложение

Запросите у нас расценки на основе ваших конкретных требований

Быть дистрибьютором

Если вы хотите распространять продукцию бренда Sentec в вашем регионе, свяжитесь с нами для получения дополнительной информации.

Установка и обслуживание

Группа профессиональных инженеров готова помочь вам с установкой и обслуживанием датчика.

Связаться!