ES-W200 Cup windsnelheidssensor

Meetbereik

0-30m / S; 0-50m / S; 0-60m / S; (other ranges can also be customized)

Beginwindsnelheid

≤ 0,3 m/s

Nauwkeurigheid

± (0.3 + 0.03V) m / s, V is wind speed

Uitgangssignaal

A: Analog output signal (0-2v, 0-5V, 0-10V), 4-20mA (current loop)
B: SDI-12 (American Hydrological Organization Serial Data Communication Interface Protocol)
C: RS485 (standaard Modbus RTU-protocol, standaardadres van het apparaat: 01)
D: Pulse signal (pulse amplitude 3.3V, 5V choose one)

Power supply voltage

Default: 5-24vdc (0-2v, RS485),12-24vdc (0-5V, 0-10V, 4-20mA); Customize: support 30VDC wider voltage customization (Remark: With heating voltage: 12-24V DC)

Stroomverbruik

24V/8mA(Heater off), 24V/0.8A(Heater on)

Stable time

< 1s

Reactietijd

< 1s

Werkomgeving

-30 ℃ ~ 75 ℃ (Not heated type),  -40 ℃ ~ 75 ℃(Heated type)

Cable specification

2m 3-wire system (analog signal); 2m 4-wire system (RS485) (optional cable length)

Materiaal

Aluminum alloy

Heating mothod

PTC automatische verwarming (alleen voor verwarmingsmodel)

Automatische verwarming

Bellow -1 ℃ , reach 25 ℃  automatically stop heating, heating power 12-24vdc

Beschermingsniveau

IP66

Remarks: The heating function is automatically controlled according to the ambient temperature, or different start and stop temperatures can be set according to the use environment (the PWM control is used in the early stage of heating to prevent the impact of the current, the time is 120 seconds)