Piranómetro solar termoeléctrico global ES-S228T

ES-S228T Thermoelectric global solar pyranometer adopts the thermoelectric principle and can be used to measure solar radiation with a spectral range of 0.3~3μm. The sensing element adopts a wire-wound electroplating thermopile, and the sensing surface is a black layer with high absorptivity. Using the thermal effect of radiation,Absorb solar radiation and convert it into thermoelectromotive force.

ES-S228T Thermoelectric global solar pyranometer adopts the thermoelectric principle and can be used to measure solar radiation with a spectral range of 0.3~3μm. The sensing element adopts a wire-wound electroplating thermopile, and the sensing surface is a black layer with high absorptivity. Using the thermal effect of radiation,Absorb solar radiation and convert it into thermoelectromotive force. It also has a temperature compensation function, which can accurately measure solar radiation. The double-layer glass cover above the sensing surface can not only reduce the influence of air convection on the device, but also block the radiation of the cover itself. And add a radiation shield to measure scattered radiation.

ES-S228T support standard analog signal or Modbus-RTU 485 communication protocol, which can directly read the current total solar radiation value, and the wiring method is simple. The appearance is beautiful, and the installation space is small.

Fuente de alimentación

10V~30V DC, or without power supply

Consumo de energía

RS485: 0.8W, Current output: 0.7W, Voltage output: 0.22W

Señal de salida

4~20mA, 0-10V, 0-5V, RS485 (Modbus-RTU)

Temperatura de trabajo

-40℃~60℃

Humedad de trabajo

0%~100%RH

Sensibilidad

7~14 μV·W-1·m2

Resistencia interna

about 300Ω

Response time (99%)

≤30 s

Error no lineal

≤±3%

Error correspondiente de direccionalidad

≤±30W/m² (≤±20W/m² customized)

Error de respuesta de temperatura

≤±8% (-40℃~+40℃)

Error de respuesta de inclinación

≤±2%

Rango espectral

0,3~3 μm

Rango de medición

0-2000 W/m²

Resolución

1 W/m²

Exactitud

±3%

Estabilidad anual

≤±3%

Spectral selectivity

≤±10%

Error de respuesta del coseno

≤±5%

Capacidad de carga

Voltage output: output resistance ≤250Ω, current output ≤600Ω

Nivel de IP

IP65 predeterminado

Documentos

Da el siguiente paso

Obtenga una cotización

Solicite una cotización basada en sus necesidades específicas.

Ser Distribuidor

Si desea distribuir la marca sentec en su área local, puede contactarnos para obtener más información.

Instalación y mantenimiento

Un grupo de ingenieros profesionales está aquí para ayudarle con la instalación y el mantenimiento de sus sensores.

¡Contacta con nosotros!