ES-S110 road surface condition detector

The ES-S110 is a non-contact road surface condition detector that uses remote sensing technology to avoid damage to the road, thereby eliminating the disruption to traffic caused by installing a road weather station. Multispectral measurement technology allows accurate detection of the thickness of ice, snow and water on the road surface.

The ES-S110 is a non-contact road surface condition detector that uses remote sensing technology to avoid damage to the road, thereby eliminating the disruption to traffic caused by installing a road weather station. Multispectral measurement technology allows accurate detection of the thickness of ice, snow and water on the road surface.

The ES-S110 detector is the best choice for road conditions where buried road sensors are inconvenient or impossible to install. Remote sensing installation means no road closures or road cutting are required, making installation safe and convenient. Low maintenance makes it an ideal choice as part of a road weather system. It can be installed on existing weather stations or other buildings with an unobstructed view of the road surface.

The ES-S110 detector is installed in an all-weather, durable housing to ensure it withstands adverse weather conditions, allowing it to provide accurate data in all weather conditions.

By providing road condition information, the ES-S110 detector provides road management departments with accurate monitoring data to take response measures before road safety is endangered.

Monitoring distance

2-15 meters

Detection diameter

25cm

Angle

30-85 degrees

Power input

12- 24VDC

Maximum power consumption

4W (including lens heating)

Operating temperature

-40 ºC to +70 ºC

Operating humidity

0 to 100%

Road surface condition parameter output

Thickness of road surface water: 0.00 — 10mm

Resolution: 0.01mm, Accuracy: 0.1mm

Road ice thickness: 0.00 — 10mm

Road snow thickness: 0.00 — 10mm

Road slipperiness: 0.00 —0.82

Resolution: 0.01mm

Road Condition Report

Dry, damp, wet, snow, ice, ice and water mixed

* Frost

* 2-hour advance warning of icy roads

Lens contamination detection

Measurement of optical lens contamination level and internal automatic contamination compensation

Pavement materials

Concrete, asphalt pavement

Communications

RS485, RS232

MTBF

1.5 x 1000000 hours

Safety

No safety issues – infrared remote sensing measurement technology

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.

¡Contacta con nosotros!