ES-T504 high-precision inclinometer is a standard industrial inclinometer that can be used outdoors for a long time by detecting the inclination angle in the use environment to determine the inclination state of the device. The inclinometer is based on a “high-performance MEMS chip” and has an internal “high-precision acceleration sensor”. It uses the proportional relationship of gravity acceleration in different directions to calculate the real-time inclination angle of the object being measured.

The output signal type is divided into RS485, the maximum communication distance is 2000 meters, the standard ModBus protocol, and supports secondary development.

Fuente de alimentación de CC (predeterminada)	DC 5-30V
Consumo máximo de energía	≤0.15W
Working temperature and humidity	-40℃—60℃, 0—95%RH (non-condensing)
Rango	X-axis -180°~180° Y-axis -90°~90° Z-axis -180°~180°
Resolución	0.01°
Typical accuracy	X, Y axis: static accuracy ±0.1°, dynamic accuracy ±0.5° Z axis: static accuracy ±0.5°, dynamic accuracy has integral error
Temperature drift	±(0.5°~1°), (-40°C ~ +60°C )
Tiempo de respuesta	＜1S
Nivel de protección	IP65
Default cable length	60cm, cable length can be customized as required
Dimensiones	905836mm
Señal de salida	0-5V/0-10V/4-20mA, RS485 (Modbus protocol), Lora, NB-IOT

Documentos

Ficha de datos

ES-T504 high-precision inclinometer

Documentos

Da el siguiente paso

Obtenga una cotización

Ser Distribuidor

Instalación y mantenimiento

Enlaces rápidos

Contáctanos