Deutsch 
English 
Español 
العربية 
Nederlands ES-W3033 Ultrasonic Wind Speed sensor For Tunnel is a special type for tunnel. The detection probe is installed on the tunnel wall to provide the wind speed and wind direction detection value in the tunnel for the tunnel general control room as the basic basis for ventilation and operation. At the same time, the analog and switch signal output from the data output interface can be connected to the PLC in the nearby sub control room, and then the data optical transceiver and optical fiber can be connected to the main control room.
ES-W3033 Ultrasonic Wind Speed sensor For Tunnel
ES-W3033 tunnel ultrasonic wind speed and direction detector is a special type for tunnel. The detection probe is installed on the tunnel wall to provide the wind speed and wind direction detection value in the tunnel for the tunnel general control room as the basic basis for ventilation and operation. At the same time, the analog and switch signal output from the data output interface can be connected to the PLC in the nearby sub control room, and then the data optical transceiver and optical fiber can be connected to the main control room.
|
Measurement principle |
Ultrasonic time-difference technology |
|
Installation |
Wall of tunnel |
|
Measurement range |
wind speed - 30 m / s ~ +30 m / S (other range customzied) |
|
Measurement accuracy |
wind speed ± 0.1 M / S |
|
Averaging time |
0.1 seconds to 60 minutes, adjustable |
|
Accuracy |
±2% |
|
Digital interface |
RS232，RS485 |
|
Protocol |
ModBus |
|
Signal output |
Wind Speed:4-20 mA output(load < 500Ω) |
|
Wind Direction: Relay output(three terminals NO or NC) |
|
|
Power supply |
100~220VAC±10%，50Hz/60Hz |
|
Protection Grade |
IP66 |
|
Operating temperature |
-45℃ - +75℃ |
|
Operating humidity |
-0 - 100% |
|
Power consumption |
1W |
Documents
Take the next step
Get a Quote
Request a quote from us based on your specific requirements
To be a Distributor
If you want to distribute sentec brand in your local area, you can contact us for more.
Installation & Maintain
A group of professional engineer is here to help your sensor installation & maintenance.
