ES-W5046 Compact Photovoltaic Weather Station

ES-W5046 Photovoltaic weather station is an instrument used in photovoltaic power station and new energy monitoring field. The product innovatively integrates various meteorological parameters that need to be monitored in the operation and maintenance management of the photovoltaic power station into one structure, which can simultaneously measure: atmospheric temperature, relative humidity, module temperature, wind speed, wind direction, atmospheric pressure, total solar radiation POA, and total radiation daily cumulative radiation.

ES-W5046 Photovoltaic weather station is an instrument used in photovoltaic power station and new energy monitoring field. The product innovatively integrates various meteorological parameters that need to be monitored in the operation and maintenance management of the photovoltaic power station into one structure, which can simultaneously measure: atmospheric temperature, relative humidity, module temperature, wind speed, wind direction, atmospheric pressure, total solar radiation POA, and total radiation daily cumulative radiation.

An RS485 interface is connected with the photovoltaic inverter to replace the traditional photovoltaic environmental monitor.

أغراض

يتراوح

دقة

دقة

تردد أخذ العينات

سرعة الرياح

0-60 م/ث

± (0.3+0.03 فولت) م/ث

0.01 متر/ثانية

4 هرتز

اتجاه الرياح

0-359.5 درجة

± 5 درجة (سرعة الرياح < 10 م/ث)

0.1 درجة

4 هرتز

درجة حرارة الهواء

- 40 درجة مئوية - + 85 درجة مئوية

±0.3 درجة مئوية عند 25 درجة مئوية

0.01 درجة مئوية

1 هرتز

رطوبة الهواء

0-100%RH

± 3% RH (10% - 80% RH، بدون تكاثف)

0.01%RH

1 هرتز

الضغط الجوي

500-1100 هيكتوباسكال

±0.5hPa(25°C، 950-1100hPa)

0.1 هكتوباسكال

1 هرتز

ضوضاء*

30-130 ديسيبل

±1.5 ديسيبل

0.1 ديسيبل

1 هرتز

PM2.5/PM10*

0-500 ميكروجرام/م³ (قابلة للتمدد 1000 ميكروجرام/م³)

± (10+10%) ميكروغرام/م³

1 ميكروغرام/م³

1 هرتز

إضاءة*

0-200 كيلو لوكس

±3% أو 1%F.S

10 لوكس

1 هرتز

الإشعاع الشمسي*

0-2000 واط/متر مربع

±5%

1 واط

1 هرتز

هطول الأمطار (بصري أو كهرضغطي)*

0-200 مم/ساعة

الدقة: 0.2 مم (بصري)، 0.1 مم (كهربائي ضغطي)

1 هرتز

وظائف الغاز الاختيارية*

CO،NO2،SO2،O3،H2S،TVOC

درجة حرارة العمل

-30 درجة مئوية ~ 70 درجة مئوية

إشارة الخرج

واجهة RS485 الافتراضية، ModbusRTU؛ SDI-12 قابلة للتخصيص

أقصى تردد للإخراج

الوضع السلبي: 1/ثانية الوضع النشط: 1/دقيقة

مزود الطاقة

تيار مستمر 9-24 فولت

مستوى الحماية

IP65 أو مخصص

طريقة التثبيت

يتم التثبيت افتراضيًا بواسطة الغلاف (تثبيت الحافة أو تثبيت لوحة الانحناء اختياريًا)

قوس التثبيت

لا يوجد للمنتجات القياسية، الأقواس مقاس 1.5 متر و1.8 متر اختيارية

كابل

كابل افتراضي بطول 3 أمتار (طول آخر اختياري)

وثائق

اتخذ الخطوة التالية

احصل على عرض أسعار

اطلب عرض أسعار منا بناءً على متطلباتك المحددة

أن تكون موزعًا

إذا كنت ترغب في توزيع العلامة التجارية Sentec في منطقتك المحلية، فيمكنك الاتصال بنا لمزيد من المعلومات.

التركيب والصيانة

مجموعة من المهندسين المحترفين هنا لمساعدتك في تركيب وصيانة أجهزة الاستشعار الخاصة بك.

احصل على اتصال!