English 
Español 
Deutsch 
العربية 
Nederlands ES-S120 non-contact road state sensor adopts remote sensing technology to avoid road damage and traffic interference caused by the installation of road meteorological station. Multispectral measurement technology can accurately detect the presence and thickness of ice, snow and water on the road surface, as well as real-time monitoring of heavy fog, rain, snow and other weather phenomena that affect traffic safety.
ES-S120 non-contact road state sensor
ES-S120 non-contact road state sensor adopts remote sensing technology to avoid road damage and traffic interference caused by the installation of road meteorological station.
|
Detect distance: Diameter of detection area |
2-8 meters；23cm |
|
|
Installation angle to horizontal direction |
30-80° |
|
|
Power supply |
12-24VDC 50mA@12VDC |
|
|
Working Environment |
Temperature：-40 ºC to +60 ºC; Humidity:0 to 95% |
|
|
Identifiable Road State |
Dry,moist,wet,snow,ice,mixture of ice and water |
|
|
Thickness of water film* |
0.00~2mm |
|
|
Thickness of ice layer* |
0.00~2mm |
|
|
Thickness of snow* |
0.00~2mm |
|
|
Level of grip* |
0.00~0.82 |
|
|
Road surface temperature* |
Measure Range:-40-70℃, Accuracy:±1% or ±1℃ |
|
|
Applicable Road |
Concrete, Asphalt |
|
|
Communication Interface |
RS485,RS232 |
|
|
Protocol |
MODBUS-RTU or active ASCII output |
|
|
Highway weather phenomena (optional) |
Road surface temperature: -40 º C to +60 º C Air temperature: -40 ºC .... +60 ºC; Air humidity: 0 .... 95%; Dew point: -40 ºC .... +60 ºC Ice warning: 2 hours in advance warning of road icing |
|
Documents
Take the next step
Get a Quote
Request a quote from us based on your specific requirements
To be a Distributor
If you want to distribute sentec brand in your local area, you can contact us for more.
Installation & Maintain
A group of professional engineer is here to help your sensor installation & maintenance.
